PAGE 13
Help: 888-426-5001
QualityWaterForLess.com
F I G U R E 13 - A
F I G U R E 13 - C
F I G U R E 13 - B
F I G U R E 13 - D
7) The display should now show
CT / Fd
as shown
in Figure 13-A. This indicates Control Type Meter
Delayed Mode. Do not change this value and press
the REGEN button to advance to the next setting
8) The display should now show
C / 32.0
. This in-
dicates the Capacity is 32,000 grains.
i
Use the
UP or DOWN button to change this value to
the one listed on page 2/calculated on pages
4 and 5
and press the REGEN button as shown
in Figure 13-B
9) The display should now show
H / 20
. This indi-
cates the Hardness is 20 gpg.
i
Use the UP or
DOWN button to change this value to the
total hardness level of your water listed on
page 2/calculated on page 4
and press the
REGEN button as shown in Figure 13-C
10) The display should now show
RS / SF
as shown
in Figure 13-D. This indicates that the Reserve
Selection is Safety Factor percentage. Do not
change this value and press the REGEN button
to advance to the next setting
11) The display should now show
SF / 10
. This indi-
cates the Safety Factor is 10%. This means the
system will leave 10% of the softening capacity
for the day before regeneration.
Use the UP
button to change the value to 15 %
and press
the REGEN button as shown in Figure 13-E
12) The display should now show
DO / 14
as shown
in Figure 13-F. This indicates the Day Override is
14 days; the system will regenerate in 14 days if
the meter has not measured water consumption
to have reached the calculated capacity. Do not
change this value and press the REGEN button
F I G U R E 13 - E
F I G U R E 13 - F
