Flavor Burst CTP 80CBB, Оборудование, техническое обслуживание и эксплуатация: Руководство

Страница: 66 / 80

65
4. Reinstall the hand pump and tighten
sufficiently.
NOTE: NO PRESSURE IS NEEDED IN THE
TANK DURING NORMAL OPERATIONS.
Connecting the Unit Syrup Line
The syrup lines attached at the lower back of
the cabinet connect the eight bags of syrup to
the Blending Assembly, with the ninth tube
connecting the sanitizer tank to the Blending
Assembly.
1. Locate the 9-Tube Lead at the back of the
cabinet. Remove the dust cap and slide the
coupler casing toward the unit to expose the
lead line coupler.
\
2. Remove the 9-hole gasket from the end of
the 9-Tube Assembly line. Spray the end of
the 9-Tube Assembly, the gasket, and the
end of the lead with sanitizer solution. Allow
these parts to sanitize for at least 5 minutes.
3. Connect the 9-Tube Lead with the 9-Tube
Assembly, with the 9-hole gasket in
between. Align the 9-hole gasket with the
coupler pins of the 9-Tube Lead and place
the gasket against the coupler. Then align
the coupler pins of the two tube assemblies
and connect them.
4. Slide the coupler casing over the connection
and screw each coupler nut into each end of
the casing. Tighten the coupler nuts to
secure the connection.