Operation and installation manual
Operation and installation manual
DISHWASHERS
27
Problem
Possible causes
Remedies
The doser cover
can’t be closed
Position OFF not se-
lected
Select OFF position, move the door lock
to the left.
Detergent agent
residues in the doser
Dishware blocks the
doser
Place the dishware in a proper way.
Vapors
Normal occurrence
Small amounts of vapors escape via an
opening close to the door lock (during
drying and water discharging).
Black or grey marks
on dishware
Alu dishware was in
contact with other dish-
ware items
Use semi-abrasive agents to remove
these marks.
Water remains at the
bottom of settlement
chamber
Normal occurrence
Some water at the bottom of the settle-
ment chamber helps keep the seals wet.
Dishwasher leakage
Doser overfilled, or rins-
ing agent spilled
Be careful, do not spill the rinsing agent.
Its spillage may result in excessive foam
formation and overfill. If spilled, wipe it
using a piece of cloth.
Dishwasher not levelled Level the dishwasher using a water
level.
Service codes
Problem
Possible causes
Remedies
E1
Problems with water sup-
ply to the dishwasher
Check if the water cock is open.
Check if the hose is bent.
Check if the drain is clogged.
E2
Problems with water
discharge from the dish-
washer
Check if the drain hose is bent.
Check if the drain is clogged.
E3
The dishwasher doesn’t
heat up water to a tem-
perature required
Clean the filter of the dishwasher. Pay special at-
tention to cleanliness of the fine mesh filter.
Remove scales and lime deposits.
Wash the washing chamber with hot water. Right
after washing, start the “Intensive” program with-
out dishware.