Operation and installation manual
Operation and installation manual
DISHWASHERS
13
Hinged cups holders
To optimally place spots and pans you can
fold teeth, as shown in the figure on your
right.
Basket for table-ware
The table-ware shall be placed into the
basket with handles downwards. If there are
side baskets, spoons shall be placed sepa-
rately, into special slots. Longer kitchenware
items shall be laid horizontally, at the front of
the basket, as shown in the figure.
To ensure high quality washing, prior to
placing the silverware make sure as fol-
lows:
• All items are separate (not put one into
another).
• Silverware items are placed with handles
upwards.
• Longer items of the kitchenware are in the
middle.
SWITCHING
ON THE APPLIANCE
Starting a washing cycle
1. Make sure the dishwasher is connected
to the mains.
2. Make sure the water cock is opened all
the way.
3. Put your dishes (See “Putting the dish-
es”).
4. Fill in rinsing and detergent agents
(See “Detergent agents” and “Rinsing
agents”).
5. Open the door, press ON / OFF button.
6. Press the program selection button, se-
lect a washing cycle desired (See “Table
of operating modes”).
7. Shut the door. Washing begins in 10
sec.
Visual control
of washing modes
*
While the dishwasher is in operation, it
is possible to visually control the washing
mode switching on / off. This function can
be implemented by means of a luminous
point on the floor, beneath the dishwasher
door. In the beginning of a washing cycle
the point starts to illuminate, and upon
completion of the cycle it starts to go
down. It is very convenient because us-
ers do not have to wait for sound signals
to inform them of completion of the cycle,
as the signal time is limited. If you see no
luminous point on the floor, this means,
washing is complete and you can take out
clean dishes.
*depending upon a model
