Flash Technology VANGUARD FTS 370i-2, Справочное руководство

Страница: 17 / 28

FTS 370i-2 IR Revision A – 05/17/2019 11
3.2 Configuration Jumpers
Configuration jumpers are located on the Controller Core PCB inside the beacon. A description
of each is provided below. To configure a particular option, move the spare jumper shunt to the
specified location.
Figure 3-2 – Configuration Jumpers
Table 3-2 – Configuration Jumpers
1. To activate mode override, the jumper must be installed while power is applied to the beacon.
The jumper has no effect if it is installed when the beacon is powered down.
2. Default flash rate is twenty (20) flashes per minute with no jumper installed on JP6 or JP7.
Jumper Description Function
JP1 1 MAN. NIGHT Forces the beacon into Manual Night mode for 30 minutes.
JP2 1 MAN. DAY Forces the beacon into Manual Day mode for 30 minutes.
JP3 ----- Spare Jumper
JP4 LEGACY Unit operates at ½ duty cycle.
JP5 PD DEFEAT The PD Alarm is disabled when the PD Defeat jumper is installed.
JP6 2 30 FPM Thirty (30) flashes per minute.
JP7 2 40 FPM Forty (40) flashes per minute.
JP8 SYNC1 (Lighting Equipment by others) Closed: Orga Sync (Open SYNC 2)
JP9 SYNC2 (Lighting Equipment by others) Closed: Unimar Sync (Open SYNC 1)
JP10 ALARM
(Jumper Installed) Reduces LED output below minimum regulatory
specification to test the system alarm circuitry.