- 13 -
Solid wire
Gasless welding
Welding wire Installation. (Refer to 3.1)
Please choose wire feed roller. Knurled roller for flux cored wire.
insert the fast plug of the ground wire in the front panel on the fast socket.
Check wire operation
:
press torch switch, the wire feeder will feed the wire through the torch tip.
Select MIG mode on the front control panel(Make sure you are not in SPOOL GUN state). After
that, select the right material and diameter you are welding with. Adjust current according your
workpiece thickness.
To find the best welding performance and suitable for your welding habits. You may also adjust
voltage and inductance to build a perfect welding bead and penetration.
flux cored wire
Spool Gun torch welding
This machine can be connected to a Spool gun torch. (package does not include a spool gun).
The use of spool gun torch is similar to that of MIG gun, except that the wire is fed through the
wire feeding mechanism of the spool gun torch itself. In the spool gun mode, the feeding
mechanism of the original machine does not work.
Select spool gun mode on the front control panel or turn on the “Spool gun” switch at MIG mode.
(This toggle switch is in the wire feeding warehouse of the machine or near the “Mode” button).
Aluminum welding is supported in spool gun mode.
Содержание FM 155E
Страница 1: ...1 Operation Manual FM155E MIG Welding Machine...
Страница 9: ...9...