PFSIFP8
Intelligent Fire Alarm Control Panel
Installation and Operation Manual
Page 35
sounder will automatically output for 10 seconds. If “Without sounder” is chosen, the
zonal sounder will not output.
Fig. 6-16
Choosing “4” in the screen of Fig. 6-14 can cancel the testing mode of one zone or all
zones. After the testing mode is cancelled, the fire alarm message from the zone will be
automatically cleared.
6.2.7 Start/Stop
Choosing “7” on the screen of Fig. 6-1 will enter the screen for starting or stopping
addressable devices (Fig. 6-17).
Fig. 6-17
6.2.8 Disable/Enable
Choosing “8” on the screen in Fig. 6-1 will access disable/enable menu. These
operations are used for faulty field devices that are not able to be repaired in time. In
such cases, they are to be disabled temporarily and re-enabled after the problems are
FAR:OK FPE:DIS Commission 20:44:30
*******************************************
*SETUP TEST ZONES*
Input test zone(1-999):001
Input test mode(0-1):0-Without sounder
Zone
number
Содержание PFSIFP8
Страница 1: ......
