17
ENG
4.2 OPERATION
1. Electrical heating mode
2. DHW heating by heat pump
3. External heating (solar or boiler)
4. Information
5. Input of adjustable parameters
6. Error display
7. Service menu selection
8. days of the week
9. “Auto/Man” operation
10. ON/OFF indicator
11. “Prog” menu selection
12. Setting the hour
13. Runtime
14. Power consumption
15. Code for cylinder temperature sensors
16. Frost protection
4.3 OPERATION MODES
“auto” symbol is displayed • operating times as set (P1, P2 or P3).
“man” symbol is displayed • Continuous operation (24 h/7 days) without time setting or in “Full” operating
mode.
4.4 SETTING THE DOMESTIC HOT WATER TEMPERATURE
The water temperature is set to 50 °C at the factory. This value can be changed
by pressing the “+” or “-” button to set the desired value. Pres the “OK” button
to confirm the setting. The set value flashes unit the setting is confirmed. If the
setting is not confirmed within 10 seconds, the previously set value is retained.
Once the temperature has been set, the display indicates the water temperature in
the cylinder.
am
pm
auto
man
prog
kWh
1 2 3 4 5 6 7
0
6
12
18
24
1
2
3
4
13
14
15
16
11
12
10
9
8
5
6
7
am
pm
auto
man
prog
kWh
1
2
3 4 5 6 7
0
6
12
18
24
