FlaktWoods RoomMaster ABR-2, Пусконаладка

Страница: 4 / 20

Fläkt Woods 8061 GB 2009.05 4
Specifications are subject to alteration without further notice.
RoomMaster ABR-2 COMMISSIONING
Setting menu structure
The menu structure has 3 levels: a main menu plus sub-
menus 1 and 2. The main menu is numbered in tens - 10,
20, etc., and the windows in sub-menu 1 beneath window
10 in the main menu are numbered singly - 11, 12, etc. Cer-
tain sub-menus also include a sub-menu 2. The windows
in sub-menu 2 under window 12 in sub-menu 1 are identi-
fied with a letter in addition to the number - 12a, 12b, etc.
Moving around in the same menu level is done with
the “Next“ key . Moving down one step to a sub-menu
is done with the “Enter“ key . Moving up one step, e.g.
from a sub-menu to the main menu, is done with the “Es-
cape“ key .
The “Plus“ and “Minus“ keys are used to
change a numerical or text parameter. The parameter val-
ue then begins to flash at the same time as it is changed.
Acknowledgement of the value is done with the “Enter“
key . The parameter value then stops flashing.
Fig. 21
10
50
20
40
80
60
30 70
11
14
12
17
13
15
12d
Huvudmeny
Undermeny 1
Undermeny 2
12e
12b
12a
12c
16
Function of setting keys
Sub-menu 2
Sub-menu 1
Main menu
Fig. 22. Main menu and sub-menu.
Next. Used to move to the next window at the
same menu level.
Escape. Used to escape from a current measure
and to move up one level in the menu.
Minus. Used to reduce and change the value of
numerical and text parameters.
Plus. Used to increase and change the value of
numerical and text parameters.
Enter. Used to enter the content of the current
window, or to initiate the measure described in
the window.
AUTO
AUTOMATIC
Weekly rhythm Std.flow
STOP
Window
Alarm
Operating
mode
keys (4)
Setting
keys(5)
Activation of setting keys
Press down the setting keys
simultaneously for 5 seconds.
Activation is confirmed by a new text and a number ap-
pearing in the display. The window contains the number
10 and the text “Set desired value“. It is now possible to
change the desired value and operating times, etc.
Locking of setting keys
The setting keys can be blocked via a terminal on the
control card. The lock is activated by jumping terminals
23 and 24.
Activation, locking and function of setting keys