FläktGroup ETCE, Инструкции по установке, эксплуатации и техническому обслуживанию

Страница: 10 / 12

FläktGroup DC_9503GB 20180817_R0 Specifications are subject to alteration without notice.
Fire Damper ETCE and ETCS - Instructions for Installation, Operation and Maintenance
10
How to change microswitch to indicate
open position
1. Release the mechanism with the test button (1) – close
the fire damper. Figure 10.
2. Remove the cover (2) and the two screws (3). Figure 11.
3. Remove the microswitch (4) screws. Figure 12.
4. Turn the switch (4) over to the position shown in Fig. 13
and fasten it with the screws.
5. NOTE! As the damper is closed, the microswitch button
is not actuated. Test the operation of the product.
6. Reinstall the cover.
7. Observe that the indicating diagram of the microswitch
has also changed.
Figure 10.
Figure 11.
Figure 12. Indicating Closed position (standard) Figure 13. Indicating Open position
1
2
3
4
4