Fixturlaser ECO D 1-1047, Руководство пользователя

Страница: 71 / 88

10.3
POWER SUPPLY
FIXTURLASER ECO display unit is powered
by a rechargeable Li-Ion battery in the
display unit, or by the external power unit.
The operating time of the batteries is
approximately 8 hours when the system is
used for a typical alignment work.
The external power unit is connected to the
USB micro connector on the display unit
and to a wall socket with 110 - 240 Volts.
When the external power supply is
connected, the unit will automatically start
charging the batteries. This will be indicated
by the battery status LED. The charging time
is approximately 8 hours for fully drained
batteries. The charging time will be longer if
the unit is turned on while being charged.
When used in typical conditions the
batteries will sustain good capacity for
approximately 2-3 years before needing
replacement. Contact your sales
representative for battery re-placement.
The batteries contain safety circuitry to
operate safely with the display unit. The unit
can therefore only be used with the Li-Ion
batteries supplied by FIXTURLASER.
Improper replacement of batteries can
cause damage and risk for personal injury.
Please refer to the chapter on safety for
further instructions.