Fixturlaser ECO D 1-1047, Руководство пользователя

Страница: 45 / 88

6.19
EVALUATING THE RESULT
The angle and offset values are used to
determine the alignment quality. These
values are compared with the alignment
tolerances to determine whether correction
is necessary. If suitable tolerances are
selected in the tolerance table, the symbols
described above indicate if the angle and
offset values are within tolerance or not.
The foot values indicate the movable
machine’s foot positions where corrections
can be made.
Depending on the result, the program will
also guide the user.
First, the program will always recommend
the user to save the measurement.
Then, if the measurement result shows that
the machine is misaligned, the user will be
recommended to go to shimming.
If the measurement result is within
tolerance, the system will recommend the
user to exit the measurement.
Save the measurement result.
Go to shimming.