Fixturlaser ECO D 1-1047, Руководство пользователя

Страница: 49 / 88

6.23
Horizontal direction
Rotate the shafts to the 3 or 9 o’clock
position to make adjustments in the
horizontal direction. The angle guide helps
you to reach the right position.
Adjust the machine horizontally until the
values for both angular and parallel
alignment are within tolerance. Make the
largest adjustment first. The arrows indicate
the direction of adjustment.
Tighten the bolts using the tightening
sequence, as below.
Check and re-measure
Rotate the shafts back to the 12 or 6
o’clock position and check that the machine
is still within tolerance.
Alignment is now completed. To confirm
the result, re-do the measurement.
Re-measure.