
8
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ASSEMBL
Y
BEFORE
YOU
BEGIN
TREADMILL
OPERA
TION
LIMITED
W
ARRANTY
TROUBLESHOOTING
&
MAINTENANCE
CONDITIONING
GUIDELINES
Disassemble box and remove the cardboard packaging that is not beneath the treadmill. Do not attempt to
lift the treadmill at this time. Remove plastic wrap from console masts.
NOTE:
During each assembly step, ensure that ALL nuts and bolts are in place and partially threaded in before
completely tightening any ONE bolt. NOTE: A light application of grease may aid in the installation of hardware.
Any grease, such as lithium bike grease is recommended.
PRE-ASSEMBLY
Open
HARDWARE BAG 1
.
Slide the left
CONSOLE MAST
down on to the
CONSOLE MAST
SUPPORT TUBE
. Bolt in place
using 2
BOLTS (B)
, 2
SPRING
WASHERS (C)
, and 2
ARC
WASHERS (G)
on the front and 2
BOLTS (B),
2
SPRING WASHERS
(C)
and 2
WASHERS (D)
on the
side.
Repeat on the other side.
Note: Carefully lift right
CONSOLE
MAST
to avoid disconnecting
CONSOLE WIRE
from the motor
control board.
A
B
C
BOLT (B)
Qty: 8
SPRING WASHER (C)
Qty: 8
WASHER (D)
Qty: 4
ARC WASHER (G)
Qty: 4
HARDWARE BAG 1 CONTENTS :
* NOTE:
Be careful not to pinch any wires while assembling the masts.
CONSOLE MAST
CONSOLE MAST SUPPORT TUBE
BOLT (B)
ARC WASHER (G)
SPRING WASHER (C)
WASHER (D)
ASSEMBLY
STEP 1