FitLogic Miracle V380, Руководство пользователя

Страница: 12 / 90

- 11 -
will become STANDBY state.
4. “DIS. / CAL.” Window: Display runner calories and distance. When show
calories, counting from 0 to 999, when it is over 999,the display will be
reset to 0; When calories counting down, it will count down from setting
data to 0, then the treadmill will stop smoothly and show ‘End’, enter the
STANDBY state after 5 seconds. Display the exercise distance. Counting
from 0:00 to 99:9, when it is over 99:9, the display will be reset to be 0:00
and the counting will start again from 0:00 to 99:9. Counting from the
target distance down to 0:00, when it reaches 0:00, the speed of the
treadmill will also be slowly decreased to “End”. After the treadmill stops
completely in 5 seconds, the unit will become STANDBY state.
BUTTON FUNCTION:
1. “POWER” Button: Press this button, and you can turn on the treadmill
after connecting the plug, then TIME window will show the user’s weight
(KG). User can rearrange the speed and incline level according to their
own weight. When all is done well, press “Enter” button to save it and
come to the next step or begin running.
2. “SELECT” Button
：
When the treadmill is on, press SELECT button to
choose and set up the exercise time and program from “0:00”,
“15:00”,“1.0”,“50”,“P1->P2->P3->P4>P5->P6->P7->P8->P9->P10-P11-
P12-P13-P14-P15-U1-U2-U3” “HRC1, HRC2, HRC3”. Manual mode is the
preset program, (0:00 is manual mode, 15.00 is TIME count-down mode;
1.0 is DISTANCE count-down mode; 50 is CALORIES count-down mode;
Pre-set programs are P1-P15 and users’ self setting programs are U1-U3;
HRC is pulse mode).
3. “ENTER” Button: Press this button go into next step or save the
parameter.
4. “START/ STOP”button
：
When starting or stopping the treadmill, you can
press this two buttons. Turn on the power and attach the magnet end of the
safety pulling rope to the computer, then press the START button at any
time and motor can start right away. Press STOP button while running; it
can stop motor and set program default; Under the manual mode, it works
from the lowest speed of 1.0Km/h and incline level of 0.