32
SYSTEM OPERATION
Select the routine parameters before selecting
“Start”
. All parameters
are similar to previous setting modes.
1. DISTANCE:
Indicates the deactivation range from the center of
the
FITLIGHT™
. The distance can be set from 10 cms to 80 cms.
2. TIMEOUT:
The TIMEOUT can be set from .10 seconds to 120
seconds.
3. SENSOR MODE:
There are 3 deactivation modes to select from.
Distance only, Impact only or both, which means the
FITLIGHT™
can be deactivated by motion or Impact.
Please refer to
“Parameter Explanations” for more information.
4.
Select if sound (Beep) is required.
5. IMPACT SENSITIVITY:
Select the sensitivity of
‘Impact”
as
required. The higher the value the less sensitive the deactivation
requires (i.e. the more force that is required for the
FITLIGHT™
to be deactivated upon impact).
6. DELAY:
The interval between
FITLIGHTS™
activating in
succession.
7. RUNTIME:
Indicates the duration of the routine.
8. COLOUR:
This gives a choice of 6 different colours.
Содержание TRAINER FLB10002DC
Страница 1: ...USER MANUAL FITLIGHT Trainer User Manual...
Страница 26: ...26 SYSTEM OPERATION RUN PROGRAMMED SEQUENCE Select Performance Training Select Run Programmed Sequences...
Страница 31: ...31 SYSTEM OPERATION Select Performance Training Select Hand Eye Coordination HAND EYE COORDINATION SET UP...
Страница 51: ...51 SUPPORT SETTINGS Select Settings And then select Settings again...
