20
SYSTEM OPERATION
RANDOM TRAINING SET-UP
1. DISTANCE:
Indicates the deactivation range from the center of
the FITLIGHT™. The distance can be set from 10 cms to 80 cms.
2. TIMEOUT:
The time out can be set from 0.10 seconds to 120
seconds.
3. SENSOR MODE:
There are 3 deactivation modes to select from:
a.
Distance only
b.
Impact only
c.
Both (meaning the FITLIGHTS™ can be deactivated by
motion or impact)
Please refer to “Parameter Explanations” for more information.
4. IMPACT SENSITIVITY:
Select the sensitivity of ‘Impact” as
required. The higher the value the less sensitive the deactivation
requires (i.e. the more force that is required for the FITLIGHT™
to be deactivated upon impact).
5. DELAY:
Select the “Delay”, for the interval between FITLIGHTS™
coming on in succession.
6. LED MODE:
Select the “LED” mode of the FITLIGHT™. There
are 4 selections which will have the LEDs flash rapidly or slowly
etc. per your preference and ease of visibility.
Please refer to
“Parameter Explanations” for more information.
7. HITS:
Select the number of hits/ FITLIGHTS™ required in the
routine. The example shows 25.
8. PENALTY:
Add a penalty for those FITLIGHTS™ that were not
deactivated.
9. LIGHT MODE:
There are 3 choices of Light mode: Center only,
Full light and Ring only.
Please refer to “Parameter Explanations”
for more information.
Содержание TRAINER FLB10002DC
Страница 1: ...USER MANUAL FITLIGHT Trainer User Manual...
Страница 26: ...26 SYSTEM OPERATION RUN PROGRAMMED SEQUENCE Select Performance Training Select Run Programmed Sequences...
Страница 31: ...31 SYSTEM OPERATION Select Performance Training Select Hand Eye Coordination HAND EYE COORDINATION SET UP...
Страница 51: ...51 SUPPORT SETTINGS Select Settings And then select Settings again...
