50
The console has:
1. Three display screens: SPEED, TIME, DISTANCE, CALORIES
2. Functional keys: SPEED, START/STOP, MODE, PROGRAM, VOLUME
FUNCTIONS
•
START
:
Press this button to start the machine.
•
STOP
:
Pulse este botón para detener el equipo.
•
PROG
:
Press this button to select a preset program. Each time you press the button it moves to the next program
in sequence (P1 to P2, P2 to P3 and so on) up to a total of 12 preset programs.
•
MODE
:
When in Manual mode and the equipment is not working, press the button to switch between time,
distance, or calorie adjustment options.
•
SPEED
:
When the equipment is in operation, press
+
to increase the speed and press
−
to decrease the speed.
The speed range is 1.0 to 12km/h. When in Manual mode and the equipment is not operating, press
+
or
−
to
adjust the time, distance, or calorie target values. When in Program mode and the equipment is not running, press
+
or
−
to adjust the time value program. You can vary the speed directly to the default range by pressing the 2,
4, 6 and 8 keys.
•
PULSE SENSORS:
The pulse sensors are located on the left and right handlebars. To detect the pulse grasp the
sensors and keep them pressed for 5 seconds, the display will show the heart rate during exercise.
•
VOLUMEN
:Press
+
or
−
to increase or decrease the volume.
•
BLUETOOTH AUDIO SYSTEM:
Download the Gfit app through the appStore, if you have an iOS system or Google
play if you have an android device, to connect your mobile device to the speakers of your tape.
•
MANUAL MODE AND PROGRAM MODE
The equipment has two basic operating modes.
NOTE:
The equipment does not need to be in operation to change or select modes.
MANUAL MODE
You are using the computer, but you are not running a preset program. In this mode, the computer can be set to
automatically stop at a preset duration of the session, distance, or calorie value used.
In this mode, once started, the computer runs until you stop it, or it can be set to a preset session duration, distance,
or target for the number of calories you want to burn.
1. Turn on the equipment.
2. Press START. The unit beeps three times, then starts at the slowest speed.
3. Adjust the speed using
+
/
−
as desired.
4. When finished, press STOP.
App
Gfit
Unloading
platforms
