10
ASSEMBLY INSTRUCTIONS
STEP 4
1. A.) Attach the Arm Curl Pad (16) to the Arm Curl Stand (7). Secure it with two Bolts (36) and
two FlatWashers (35).
2. B.) Insert the Arm Curl Stand (7) into the top opening on the Front Leg (5). Secure it with a
Lock Knob (38).
3. C.) Place a Spring Clip (19) onto theWeight Post on the Leg Developer.
4. D.) Place two Bungee Ropes(17) onto the Upright Beams.
5. E.) Insert two Bar Catchers (10) into both Upright Beams.
6. F.)When using Leg Developer, remove the Arm Curl Stand from the Front Leg.
NOTE: Tighten All Bolts At This Time
