8
ASSEMBLY INSTRUCTIONS
STEP 2
1. A.) Place the Backrest Adjustment Bar(9) between the two Uprights to obtain desired incline
of Backrest.
2. B.) Attach the Main Seat Support (3) to the Cross Brace (2) using two Bolts (28), two Flat
Washers (27) and two Nuts (29). Do Not tighten the Bolts yet.
3. C.) Attach the Front Leg to the Main Seat Support (3), secure it with three Bolts (36) and three
Washers(35). Do Not tighten the Bolts yet.
4. D.) Attach the Main Seat Stabilizer (6) to the Main Seat Stabilizer (3), secure it with one
Bolt(34), one FlatWasher (35) and one Nut(40). Attach the other end of Main Seat Stabilizer (6)
to the Front Leg (5). Secure it with one Bolt (36).
5. E.) Attach the Backrest Supports (4) onto both ends of the pivot on the Main Seat Support (3),
place the other end rest against the Backrest Adjustment Bar (9).
6. F.) Tighten part B, C, D Nuts and Bolts.
7. NOTE: Make Sure all Nuts and Bolts Securely tighten .
