P/N 562179
REV. C Dec 2011
5
© 2011 Fisnar
UNDERSTANDING THE CONTROLS
Suck Back Control
–
Keeps a steady pull of air pressure in the syringe when not dispensing. This will help with material
leaking from the syringe.
Pressure Gage
–
Shows the amount of pressure being used to dispense.
Pressure Regulator
–
Adjusts the amount of pressure being used to dispense. In order to reach a desired pressure
level, first to pull the knob out to unlock it so it will rotate. Turn the knob counter-clockwise to a
point below the desired pressure, and then turn the dial clockwise to reach the desired pressure.
Barrel / Valve Air Outlet
–
Air outlet where valve or barrel can be hooked up.
Digital Display
–
Displays information pertaining to the programming and use of the unit.
▲/SET
–
Used as an up scroll key and to begin the programming of a mode.
▼/MEM –
Used as a down scroll key and to save / recall a program.
◄
/SHOT
–
Used as a left scroll key and to begin dispensing.
MODE/EXIT
–
Used to toggle between dispensing modes and to exit some functions.
Operation Modes
-
MANUAL
–
In this mode the unit will dispense as long as the foot pedal or SHOT button is pressed.
-
TIME
–
The unit will dispense for a set amount of time regardless of how long the foot pedal or shot button is pressed.
-
CYCLE
–
The unit will dispense and wait for a specified amount of time before dispensing again. It will cycle
continuously until the
EXIT
button is pressed.
Switching Between Modes
Use the
MODE
button to switch between the 3 modes. You can identify which mode you are in by the illuminated light
above the modes.