Fisherbrand accumet AB315, Руководство пользователя

Страница: 8 / 32

8 Chapter 2 | Getting Started
2.3 Keypad Functions
Key Function
In Continuous measure mode, press to hold
a reading on the display and then press
again to release a reading on the display.
In Auto-Read measure mode, press to start
a new reading.
Press to escape the Setup Menu and
Calibration mode without saving changes.
In Continuous measure mode, press to save
the reading to the data log and export to an
external device if one is connected.
Press to enter the Setup Menu.
Press to exit the Setup Menu.
Press to enter the Calibration mode.
Press while in the Calibration mode to save
and end the calibration when performing a
one to four point pH calibration.
Press to scroll through menu items in the
Setup Menu; the list is cyclical.
In the Measure mode, press and hold (long
press) for three seconds as a shortcut key to
change the measure type from pH to RmV.
Press to change a setting in the Setup
Menu. Press to scroll through a list or
change a numeric value.
In the Calibration mode, press to manually
change the calibration value.
In the Measure mode, press and hold (long
press) for three seconds as a shortcut key to
view current date and time setting.
Press to save a setting in the Setup Menu.
Press to accept a calibration point in the
Calibration mode.
Press to power on the meter. When the
meter is on, press to turn the backlight off or
on. When the meter is on, press and hold
for three seconds to power off the meter.
2.3.1 Setup Menu Scrolling
To scroll through the Setup Menu list:
•
Press the “Menu” key to enter the Setup Menu.
• The first Setup Menu item will always be show.
• Press the

key to scroll to the second item or
press the  key to scroll to the last item.
• The item list is cyclical and will scroll from the last
item to the first item as the
 key is pressed.
2.3.2 Setup Menu Value Changes
For all numeric value changes, press the

or

key to
edit a value:
• Press the

key once to increase the value by one
least significant digit/unit.
• Press the

key once to decrease the value by one
least significant digit/unit.
• Press and hold the

key to quickly increase the
numeric value.
• Press and hold the

key to quickly decrease the
numeric value.
2.3.3 Mode Shortcut Key
In the main measure mode, press and hold (long press) the

or

key for approximately three seconds to change the
main measure mode to pH or relative mV (RmV).
2.3.4 Date and Time View
Shortcut Key
In the main measure mode, press and hold (long press) the

or

key for approximately three seconds to view the
current date and time settings.