background image

V150S Slurry VeeBall Valve

Instruction Manual

November 2010

9

Figure 9. Exploded View, Fisher V150S NPS 3 through 12

(Including Alternative Ceramic Insert Construction, Keys 28 and 29)

29

28

W8513

Parts Ordering

A serial number is assigned to each valve and
stamped on the nameplate. Always refer to the valve
serial number when corresponding with your
Emerson Process Management sales office
regarding spare parts or technical information. When
ordering replacement parts, also specify the
complete 11-character part number from the parts
kits or parts list information.

WARNING

Use only genuine Fisher replacement
parts. Components that are not
supplied by Emerson Process

Management should not, under any
circumstances, be used in any Fisher
valve, because they may void your
warranty, might adversely affect the
performance of the valve, and could
cause personal injury and property
damage.

Note

Neither Emerson, Emerson Process
Management, nor any of their affiliated
entities assumes responsibility for the
selection, use, or maintenance of any
product. Responsibility for the
selection, use, and maintenance of any
product remains with the purchaser
and end user.

Содержание V150S













Отзывы: