Fisher LCP200 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 24

Fisher LCP200 Скачать руководство пользователя страница 2

Instruction Manual

D104296X012

LCP200 Local Control Panel

August 2018

2

Do not install, operate, or maintain an LCP200 local control panel without being fully trained and qualified in valve,
actuator, and accessory installation, operation, and maintenance.

To avoid personal injury or property damage, it is

important to carefully read, understand, and follow all of the contents of this manual, including all safety cautions and
warnings.

If you have any questions about these instructions, contact your

Emerson sales office

Description

The LCP200 local control panel is used with the HART

r

communicating DVC6200 SIS digital valve controller. This panel

is used to manually open and close a safety shutdown valve. The LCP200 can be configured to auto or manual reset
after a trip. It also offers a smart auto reset configuration which requires a manual reset for locally initiated trips but
auto reset for all other trips. Additionally, it includes a button for initiating a partial stroke test.

Specifications

Typical specifications for the LCP200 local control panel are shown in table 1.

Educational Services

For information on available courses contact:

Emerson Automation Solutions
Educational Services - Registration
Phone: 1-641-754-3771 or 1-800-338-8158
e‐mail: [email protected]
emerson.com/fishervalvetraining

«
1
2
3
4
...
»

Содержание LCP200

























Отзывы:

Нет отзывов