Fisher EMERSON VSX4 Series, Инструкция по эксплуатации

Страница: 14 / 16

KEy IDENTIFICATION
PART NUMBER
Type VSX4L Type VSX4H Type VSX8L
1 Lower case GF01865X012 ERCA00875A0
2 Upper case GF01866X012
3 Closing cap GF01922X012
4 Reset pin GF01936X012 ERAA06343A0
5 Back plate GF01926X012
6* Diaphragm GF01929X012
7* Diaphragm plate GF01927X012 GF01944X012 GF01927X012
8 Valve plug spring GF02174X012 ERAA06243A0
9 Plug support GF01939X012 ERAA05874A0
10 Spring locator GF01938X012 ERCA01265A0
11 Fastening clip of reset pin (4 required) FA406150X12
12 Nut H M6 (8 required) GE38209X012
13 Ring (2 required) GF01932X012
14* Closing Cap O-ring (51.00 x 3.00) GF03448X012
15 Self-locking ring FA406200X12
16* Screw H M6 x 16 (8 for the spring case and 1 for the diaphragm assembly) GE38207X012
17 Connection ring (not shown) GF01937X012 - - - - - - - - - - -
18 Axis GF01935X012
19 Cam ERCA00252A0
20 Screw HM4 x 8 (2 required) GF03474X012
21 Flexing spring GF04808X012
22 Fastening clip FA406153X12
23 Manual button GF01933X012
24 O-ring (2 required) GF03445X012
25 Relatching spring GF02175X012
26 Gland sleeve GF01931X012 ERAA05855A0
27 Travel indicator diaphragm GF01928X012
28 O-ring R8 (8.90 x 2.70) (3 required for VSX4 Series, 2 required for VSX8 Series) GF03446X012
29 O-ring R1 (2.60 x 1.90) (2 required) GF03447X012
30 Reset button GF01930X012
ERCA01254A0,
ERCA01044A0
(2)
31* Lock nut FA404550X12
32 Diaphragm support
(1)
(not shown) - - - - - - - - - - - GF01934X012 - - - - - - - - - - -
33* Inlet O-ring 8073 (36.0 x 2.2) GF03442X012
34 Screw H M6x12 (not shown) (4 required) GE38176X012
36 Half flange (not shown) (2 required) GF01942X012
38 UPSO Spring See Table 2
40 UPSO Adjusting screw ERAA05947A0
41 OPSO Spring See Tables 1 and 2
42 Maximum washer GF01925X012
43 OPSO Adjusting screw GF01923X012
44 Fastening ring (not shown) GF04079X012 - - - - - - - - - - -
46* Outlet O-ring I 5370 (54.0 x 2.0) GF03443X012
47* VSX4 Series Valve plug D24/Disk (Medium capacity) GF01940X012 - - - - - - - - - - -
47* VSX8 Series Valve plug D39/Disk (High capacity) - - - - - - - - - - - ERAA05852A0
48 Vent 27A5516X012
49 Plug, 1/4 NPT (not shown) (for Internal only) 1C333528992
50* Sense blocking O-ring (2.00 x 1.25) (for External only) GF03449X012
51 Sense Blocking Screw (for External only) GF02261X012
52 Limit switch - - - - - - - - - - - M4006669X12
(2)
53 Travel stop - - - - - - - - - - - ERAA05924A0
54 Positioner ERCA01078A0
(2)
58 Safety nut M4 - - - - - - - - - - - ERAA05875A0
80 Base label - - - - - - - - - - -
81 O-ring (1.15 x 1.00) (not shown) (4 required) GF03444X012 - - - - - - - - - - -
83 Lockwire T14088T0012
84 Slamshut label - - - - - - - - - - -
93 O-ring R8 (10.82 x 1.78) - - - - - - - - - - - ERCA02550A0
96 Nut M (2.5 x 0.45) - - - - - - - - - - - ERCA01387A0
102 Ring Guide - - - - - - - - - - - ERAA05861A0
103 Mini Washer (for UPSO spring) ERAA05957A0
104 Maxi Seat ERAA05956A0
1. When adjusting the controller, refer to the Controller Spring Range tables, Tables 1 and 2, to ensure the desired set value is achievable for the controller construction, either low
pressure (Type VSX4L or VSX8L) or high pressure (Type VSX4H).
2. Applicable for Type VSX8 with remote trip sensor.
*Recommended Spare Part
Parts List
VSX4 and VSX8 Series Controller
Parts Ordering
Controller that have been disassembled for repair
must be tested for proper operation before being
returned to service.
The type number, pressure ranges, functional
class and date of manufacture are stamped on the
nameplate. Always provide this information when
corresponding with your local Sales Office regarding
replacement parts or technical assistance.
When ordering replacement parts, refer to the key
number of each needed part as found in the parts list.
Separate kits containing all recommended spare parts
are available. See tables on pages 15 and 16.
VSX4 and VSX8 Series
14