Fisher Scientific Isotemp 178L 120V, Руководство пользователя

Страница: 35 / 92

Product Description
Data Communications & Alarm Interface
Fisher Scientific Peltier Low Temp. Incubators 4-9
Data Communications & Alarm Interface
All signal connections are installed in the electrical interface panel at the rear of the low
temperature incubator.
RS-232 Interface
The RS- 232 interface (item 2 in figure 4-9 below) may be used to connect Fisher Scientific
low temperature incubators to the serial interface port of a computer to allow for the
computer-aided acquisition and documentation of major operating parameters (temperature,
error codes, etc.).
[1] Sample Sensor connection
[2] RS 232 interface
[3] Not used
[4] Power socket
[5] 2 fuses T 2A H 250 V, for socket
Figure 4-9 Signal Interfaces and Power Socket
AC Power Socket
The low temperature incubator is connected to the AC supply mains via the socket (item 4 in
figure 4-9 ), which accepts a power cord with an IEC standard plug.
Fuses
15 A device fuses
Two 15 A slow-blow fuses mounted on the low temperature incubator’s main electronic circuit
board protect internal circuitry from the impact of excessive power consumption.


Replacement should only be carried out by skilled and authorized
qualified personnel of electrotechnology/signal engineering!