behr TRS 300
– 10 –
271005
behr TRS 300
– 11 –
© behr Labor-Technik 2007
271005
Prog 01/01
14:05
==>>
START
EIN
022
°C
3
1
6
5
4
2
The Start menu
1 If a program has been started, or the unit is
preheating, the target temperature is displayed
here.
If no program is running, but a starting time
has been selected, the starting time is display-
ed here.
This box is otherwise blank.
2 The temperature currently measured by the
temperature sensor is always displayed here.
3
„Start”
menu item: The temperature program
most recently selected starts if this menu item
is selected. What program this is is1 indicated
at bottom left.
4
„Preheat ON/OFF“
menu item: the TRS 300
will preheat to the starting temperature for the
temperature program selected if this menu
item is selected. The menu item will then
change to
„OFF“
. Select
„OFF“
in order to
switch the heating function off again.
5 The program currently selected, and the pro-
gram step reached, are indicated here.
6
„Continue“
menu item: select this menu item
to access other possible settings. You can
-
select another program
-
write a new program
-
configure the unit to your needs
