behr TRS 300
– 8 –
271005
behr TRS 300
– 9 –
© behr Labor-Technik 2007
271005
Connecting the TRS 300
Danger of electric shock!
Always install all cables in such a way
that they cannot come into contact with
the hot inner zone of the heating block;
they could otherwise smoulder through!
Position the TRS 300 next to your digester.
The positioning/carrier stand can be adjusted;
it engages at intervals of 30 degrees. Please
select a position in which you can read off and
operate the unit without difficulty.
Connect the power cable (Page 7, Section 2.5) of
the control unit to a safety-contact power socket.
Then connect your digester to the control unit:
Insert the power-supply cable plug on the digester
into the HEATING socket (Page 7, Section 2.4)
and secure it using the union nut.
Insert the three-pole diode connector on the tem-
perature sensor into the TEMP PROBE PT 100
socket (Page 7, 2.2) and secure it using the
union nut.
