7
6
• At an angle, fit the tab on the back
of the soother into the slot in the
crib connector.
• Push the top of the soother to
“snap”
in place.
INSIDE CRIB VIEW
INSIDE CRIB VIEW
Soother Tab
Soother Tab
Soother Receiver
Soother Receiver
Remote
Remote
Remote Use
• Make sure there is a clear path
between the remote and the soother.
• Point the end of the remote toward
the soother receiver and press
the button.
Notes:
• You can use the remote to "wake up"
the soother from "sleep" mode (for
up to 10 hours of inactivity).
• In the unlikely event that use of the
remote interferes with normal use of
other remote controlled equipment,
such as televisions and stereos, or
use of other electronic or battery
powered appliances interfere with
operation of the soother, do not use
both at the same time.
• You may notice a loss of range
between the remote and the soother
when using in bright or flourescent
light. For best performance, avoid
using the remote in areas of bright
light. Move the soother, or
reduce the amount of light to
improve performance.
Crib Attachment
7
