4
• Locate the battery compartment on
the back of the remote.
• Loosen the screw in the battery
compartment door with a Phillips
screwdriver and remove the door.
• Insert two “AAA” (LR03)
alkaline
batteries.
• Replace the battery compartment
door and tighten the screw. Do not
over-tighten.
• If the remote begins to operate
erratically, you may need to reset the
electronics. Remove the batteries
and reinstall them.
In exceptional circumstances,
batteries may leak fluids that can
cause a chemical burn injury or
ruin your product. To avoid
battery leakage:
• Do not mix old and new batteries or
batteries of different types: alkaline,
standard (carbon-zinc) or
rechargeable (nickel-cadmium).
• Insert batteries as indicated inside
the battery compartment.
• Remove batteries during long
periods of non-use. Always remove
exhausted batteries from the product.
Dispose of batteries safely. Do not
dispose of product in a fire. The
batteries inside may explode or leak.
• Never short-circuit the
battery terminals.
• Use only batteries of the same or
equivalent type, as recommended.
• Do not charge non-recharge-
able batteries.
• Remove rechargeable batteries from
the product before charging.
• If removable, rechargeable batteries
are used, they are only to be charged
under adult supervision.
Remote Battery
Installation
Battery Safety
Information
1,5V x 2
“AAA” (LR03)
