Fisher-Price V4595, Инструкция по эксплуатации

Страница: 6 / 12

6
9
Insert two #8 x 1˝ (2,5 cm) screws into the holes in the collar •
and tighten.
8
Slide the collar down onto the board. •
Stage 1 Assembly
Sit & Scoot Mode
7
Insert a #10 x ¾˝ (1,9 cm) barrel nut into the front hole in the •
post
A
. Next, insert a #10 x ¾˝ (1,9 cm) screw into the rear hole
in the post
B
and into the barrel nut.
Turn the front wheel assembly slightly. •
While holding the barrel nut in place with a Phillips screwdriver, •
fully tighten the screw with another Phillips screwdriver.
IMPORTANT!
Pull up on the handlebar to be sure it's secure. If you
can remove the handlebar, please go back to step 2 to assemble the
extension tube, handlebar and collar to the post.
Collar Collar
#8 x 1˝ (2,5 cm) Screws