Fisher-Price V4595, Инструкция по эксплуатации

Страница: 7 / 12

7
3
Turn the board over so that the stepping area curves down. Fit the •
board back onto the front wheel assembly, as shown.
Hint: The board and front wheel assembly are designed to fit one way
for stage 2 use. If the front wheel assembly does not seem to fit,
turn it around and try again.
2
Remove the rear wheel assembly from the board. Set the rear •
wheel assembly aside. It will be re-assembled in step 9.
1
Loosen and remove the four #8 x 1 • 3 /
8
˝ (3,5 cm) screws in the
board near the rear wheel assembly.
Set the screws aside. They will be re-used to assemble the
•
rear wheel in the last step.
2
Remove the rear wheel a •
wheel assembly aside. It
Stage 2 Assembly
Stand & Scooter Mode
Step
ping
Are
a
Stepping Area
#8 x 1
3 3
//
8 8
˝
(3,5 cm) Screws
Rear Wheel Rear Wheel
Assembly Assembly