Fisher-Price V4595, Инструкция по эксплуатации

Страница: 8 / 12

8
4
5
Slide the collar (wide end down) onto the post, as shown. •
Insert two #8 x 1˝ (2,5 cm) screws into the collar and tighten. •
Position the extension tube so the end with • two holes
is upright
.
Slide the extension tube onto the handlebar. •
6
Align the holes on the extension tube with the holes •
in handlebar.
First, insert a #10 x ¾˝ (1,9 cm) barrel nut into a hole in the
•
extension tube
A
. Then, insert a #10 x ¾˝ (1,9 cm) screw into the
opposite hole in the extension tube
B
.
While using a Phillips screwdriver to hold the barrel nut in place, •
fully tighten
the screw with another Phillips screwdriver.
Check to be sure the handlebar is attached to the extension tube. •
If you can pull them apart, go back to step 5 and follow the
instructions carefully.
7
Slide the handlebar assembly into the front wheel assembly post. •
Stage 2 Assembly
Stand & Scooter Mode
Collar Collar
#8 x 1˝
(2,5 cm)
Screws
Handlebar Handlebar
Extension Tube Extension Tube
2 Holes 2 Holes
Upright Upright
4 Holes 4 Holes