18
Motor is not running;
Power is not on
Turn the power dial to one of six settings.
no swinging
Batteries incorrectly installed
Remove the batteries and replace in correct orientation, as
indicated inside the battery compartment.
Dead batteries
Replace all four batteries with four, fresh “D”
alkaline
batteries.
Motor is running but
Need to start swinging motion
To start swinging motion, give the seat a light push.
swinging stops after a
few minutes
Swing motion setting is inappropriate
Adjust the power dial to a higher speed setting and give the
for child’s weight
seat a light push.
Weak batteries
Replace all four batteries with four, fresh “D”
alkaline
batteries.
No difference noticed in
Swing did not have sufficient time
Allow the swing time to adjust to new setting.
swinging motion after
to adjust to different setting
power dial is adjusted
Weak batteries
Replace all four batteries with four, fresh “D”
alkaline
batteries.
Swinging motion too high
Normal operation
To slow swinging motion, place one end of a blanket underneath
even at the lowest setting
your child and let the other end drape down while swinging.
Waterglobe (lights)/mobile,
Power dial is not on correct setting
Position the power dial to the
position.
music/sounds do not work
and swing is off
Dead batteries
Replace all four batteries with four, fresh “D”
alkaline
batteries.
Waterglobe (lights)/mobile, music/sounds
Press the reset button
to restart waterglobe (lights)/mobile,
turn off automatically after seven minutes
music/sounds for another seven minutes.
Music/sounds do not work
Music/sounds switch is
Slide music/sounds switch to desired setting
.
(and power dial is set to
)
in OFF
position
Music/sounds turn off
Press the reset button
to restart music/sounds for
automatically after seven minutes
another seven minutes.
Waterglobe (lights) does not
Mobile/waterglobe switch is in
Slide mobile/waterglobe (lights) switch to desired setting
.
work (and power dial is set to
)
OFF
position or mobile only
position
Waterglobe (lights)/mobile turn off
Press the reset button
to restart waterglobe (lights)/mobile
automatically after seven minutes
for another seven minutes.
Mobile does not work
Mobile/waterglobe (lights) switch is in
Slide mobile/waterglobe (lights) switch to desired setting
.
(and power dial is set to
)
OFF
position or waterglobe only
position
Mobile/waterglobe (lights) turn off
Press the reset button
to restart mobile/waterglobe (lights)
automatically after seven minutes
for another seven minutes.
e
Problems and Solutions
e
Problems and Solutions
Problem
Probable Cause
Solution
