Battery
Installation
Battery Safety
Information
• For longer life, use
alkaline
batteries.
• Loosen the screw into the battery compart-
ment door with a Phillips screwdriver and
remove the door.
• Insert two, new AA (LR6)
alkaline
batteries.
• Replace the battery compartment door and
tighten the screw. Do not over-tighten.
• If this toy begins to operate erratically, you
may need to reset the electronics. Slide the
power/volume switch off and back on.
• When sounds become faint or stop, it’s time
for an adult to change the batteries.
Assembly
• Insert and “
snap
” the handle into the scooter.
Hint:
The handle is designed to fit into the
scooter one way. If it does not seem to fit, turn
it around and try again.
1,5V x 2
AA (LR6)
In exceptional circumstances, batteries may
leak fluids that can cause a chemical burn injury
or ruin your product. To avoid battery leakage:
• Do not mix old and new batteries or batteries
of different types: alkaline, standard (carbon-
zinc) or rechargeable (nickel-cadmium).
• Insert batteries as indicated inside the
battery compartment.
• Remove batteries during long periods of
non-use. Always remove exhausted batteries
from the product. Dispose of batteries safely.
Do not dispose of this product in a fire. The
batteries inside may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent
type, as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the
product before charging.
• If removable, rechargeable batteries are
used, they are only to be charged under
adult supervision.
• Protect the environment by not
disposing of this product with
household waste (2012/19/EU).
Check your local authority for
recycling advice and facilities.
