Fisher & Paykel WH1060P, Инструкция по установке и Руководство пользователя

Страница: 8 / 44

6
INSTALLATION INSTRUCTIONS
D
3
Detach the drain hose
from the plastic clasp, and
remove the clasps on the
side of the transit braces.
Removing the drain hose
4
Remove the 12 transit brace
screws from the left and
right sides, and near the
centre of top and bottom
braces (refer to
C
).
5
Remove the braces (refer
to
D
). Keep the braces and
screws for future use.
7
Remove the yellow safety clip
from the power cord.
8
Cover the transit bolt holes with
the plastic plugs (provided).
Push to clip into place (refer to
F
). Covering bolt holes with plastic plugs
F
6
Pull out the two transit rods
located below the two lower
transit bolt holes (refer to
E ).
Removing the transit rods
E
Removing the braces Removing the transit brace screws
C