manualshive.com logo in svg

Fisher & Paykel WH1060P, Инструкция по установке и Руководство пользователя

Поделиться
Скачать
Fisher & Paykel WH1060P Скачать руководство пользователя страница 29

27

Cleaning the inside of your washer

It is important that you regularly clean the inside of your washer 
using the ‘Drum Clean’ cycle. After 100 cycles the 

 icon will 

flash every time you turn your washer on to remind you to do 
this. If your washer starts to smell this is a sign that you should 
complete a ‘Drum Clean’ cycle. We recommend that you do not 
have any items in the washer when you run this cycle.

To clean the inside of your washer:

1

  Add approximately 2 scoops of a good quality powdered detergent directly into the 

‘MAIN WASH Powder’ compartment of the dispenser drawer or use a drum cleaning 
product specifically designed for front loading washing machines (follow manufacturer’s 
instructions).

1

  Press ‘POWER’ to turn your washer on and select the ‘Drum Clean’ cycle.

3

 Touch   to start the cycle.

Cleaning the drum and the door

●

●

Use a soft damp cloth to wipe the door, cleaning any water marks or residue off it.

●

●

Wipe the rubber seal around the door. Remove any items or lint accumulating in the 
bottom of the seal catchment and wipe out any water accumulated here. If this is not 
cleaned out, unpleasant odours will develop.

●

●

If the drum has any residual dirt or lint stuck to it, remove this and wipe the drum clean.  
Do not leave any metal objects in the drum as these may rust and cause staining.

Cleaning the hoses

Each inlet hose has a filter in it, preventing any solid contaminants in the water from 
entering your washing machine. Occasionally you should disconnect the water inlet 
hoses where they connect to the taps, check these for any build up of dirt and wash  
the filters out.

CARING FOR YOUR WASHER

‘Drum Clean’ cycle

Содержание WH1060P













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды