Fisher & Paykel WH1060P, Инструкция по установке и Руководство пользователя

Страница: 27 / 44

25
Options
● ●
Touch the ‘Options’ button repeatedly to select between ‘Wrinkle Free’ and ‘Eco’.
Wrinkle Free
We recommend you remove the clothes from the washer immediately
after the completion of the cycle to minimise wrinkling and creasing
of items and to prevent dye run. However, if you will not be present
at the end of the wash you can select ‘Wrinkle Free’.
When ‘Wrinkle Free’ is selected, the washer will tumble the clothes
once every 15 minutes for up to 12 hours after the cycle has finished.
The ‘Wrinkle Free’ light and
button will flash, and the washer will beep
at regular intervals to remind you to remove your load. To remove the
load during this phase, press the
button.
Eco
Use the ‘Eco’ option to save water and energy. Selecting ‘Eco’ will reduce the
wash temperature slightly and alter the wash and rinse programming.
Note: ‘Eco’ cannot be selected after a wash cycle has been started, ie, if you touch
and try to select ‘Eco’ it will be unavailable. ‘Eco’ must be selected before the cycle
starts. This option will not be available if ‘Rinse+’ has been selected.
IMPORTANT!
● ●
If you wish to, you can select both ‘Wash Boost’ options of ‘Pre Wash’ and ‘Rinse+’
to perform on the same cycle. Likewise, you can select ‘Eco’ and ‘Wrinkle Free’ to
perform on the same cycle. Touch the appropriate button until both options are
selected. Repeat to deselect an option.
● ●
For clothes care and performance reasons not all options are available on all cycles.
Reset defaults
You can reset your washer to the default settings it left the factory with:
1
Turn the dial to select ‘Spin’.
2
Touch and hold the ‘Delay Start’ ‘More’ , the ‘Delay Start’ ‘Less’ and ‘Options’
buttons together for 3 seconds will appear on the screen and the machine
will beep.
3
Your washer will now be reset to the default settings.
CUSTOMISING WASH CYCLE