Fisher & Paykel WH1060P, Инструкция по установке и Руководство пользователя

Страница: 18 / 44

16
CONTROL PANEL
Time to Go
‘Time to go’ shows approximately the time remaining of the cycle you are currently running.
This allows the user to get a glance of when washing will be done.
The overall cycle time can vary depending on several factors, such as water flow rate, water
pressure (whether hot water is used from tap or water is heated by an internal heater), load
size, cycle and option selections. Other issues can also increase the cycle time, eg out of
balance, oversudsing.
Add a Garment
The ‘Add a Garment’ option enables you to add or remove items during the wash stage
of the cycle, under certain conditions.
● ●
Once the ‘Add a Garment’ button is touched, the button will flash and a notification
will be shown on the display screen. Wait until you hear the door unlock.
● ●
Open the door and add or remove items. Close the door and touch to restart the cycle.
● ●
The ‘Add a Garment’ button will only operate during the wash part of the cycle and
when the temperature selected is lower than 60°C. ‘Add a Garment’ can still be used if
the water level is above the bottom of the door, as your washer will drain the water to a
lower level so the door can be opened.
Keylock
This option enables you to deactivate the buttons on the display panel, except for
the ‘POWER’ and ‘Keylock’ buttons. This prevents accidental button presses.
To turn Keylock mode ON or OFF when the washer is powered on:
● ●
Touch and hold button for 2 seconds. You will hear a beeping sound and button
illuminated to indicate ‘Keylock’ is active.
If Keylock mode is activated and the machine is powered off:
● ●
To turn your washer on, press ‘POWER’ button, then touch and hold the button
for 2 seconds. Select your wash cycle, options and then
to start the cycle.
● ●
To turn the washer off at anytime when keylock is activated simply press the ‘POWER’
button.