The probe must be always kept in its housing, in a clean condition, as an incorrect position or entrustment may cause an
alteration in the control of the temperature.
Fig. 3.1
Oven Thermostat
The numbers printed on the control knob (fig. 3.1) indicate
the increasing oven temperature value (see temperature
table, in °F near the control knob or temperature table,
°F/°C, below the Fig. 3.1).
Left column of the temperature table refers to oven burner
used in combination with the fan motor while right column
refers to oven burner used in the normal convection mode
(without fan motor).
To regulate the temperature, set the chosen number to the
mark on the bezel. The position BROIL serves only to turn
on the broil burner.
Oven Light and Fan Motor
The oven light and the fan motor are controlled by a switch
knob on the control panel (fig. 3.2). To light up the oven
lamp turn the knob clockwise to LIGHT position.
To operate the fan motor turn the knob clockwise to LIGHT
& FAN position.
In this setting also the oven lamp is lighted.
The switch knob can be turned
only clockwise from OFF to
LIGHT & FAN position and
counter-clockwise from OFF to
LIGHT position.
DO NOT TURN from LIGHT &
FAN to LIGHT position or from
LIGHT to LIGHT & FAN
positions.
DO NOT FORCE
.
Updated: Sun, 31 May 2020 20:19:05 GMT
Powered by
3
