
27
1
2
WRONG
CORRECT
Care and cleaning
Replacing the oven halogen light bulb(s)
Note: oven bulb replacement is not covered by your warranty.
Important!
Never replace the bulb with bare hands. Contamination from fingers can cause premature failure.
Always use a clean cloth or gloves.
1
Let the oven cavity and the grill element cool down.
2
Important!
Disconnect the oven from the power supply before continuing.
LEFT LAMP (some models only)
3a
Remove the left side rack (and catalytic panel if supplied). See ‘Removing and refitting the
side racks and catalytic panels’.
4a
Press down on the lamp cover and rotate to remove.
Important!
Never use screwdrivers or other utensils to remove the lamp cover, as doing so could damage the
surrounding enamel. Only use your hands.
5a
Replace the halogen bulb with a new one suitable for high temperatures (300
o
C) with the
following specifications: 220-240V, G9 and same wattage as the bulb being replaced (check
wattage stamped on the bulb).
6a
Refit the lamp cover, operating in reverse order. Make sure that it clicks into place.
Important!
The notch in the inner edge of the cover must be on the side closer to the back of the oven.
7a
Refit the left side rack (and the left catalytic panel if supplied).
8a
Turn the power to the oven back on. Set the clock.
TOP RIGHT LAMP
3b
Twist the lamp cover off.
4b
Replace the halogen bulb with a new one suitable for
high temperatures (300
o
C) with the following specifications:
220-240V, G9 and same wattage as the bulb being replaced
(check wattage stamped on the bulb).
5b
Twist the lamp cover back on.
6b
Turn the power to the oven back on and set the clock.
Fig.14 Removing the oven lamps
Notch
Содержание OB60B77CEX
Страница 1: ...USER GUIDE GB IE BUILT IN OVEN Models OB60BCEX OB60B77CEX OB60DDEX ...
Страница 2: ......
Страница 7: ...5 ...