Fisher & Paykel DCS CAD1 Series, Инструкция по установке и Руководство пользователя

Страница: 16 / 20

14
INSTALLATION
Side shelf assembly instructions (optional)
Optional attach side shelf accessory on either side
Note: side shelf model CAD1-SK can be installed with the head already on the cart.
Screw two shoulder bolts into the bottom
screws on the side of the cart. Tighten with
5/32 Allen wrench.
Slide left and right side shelf brackets over
the shoulder bolt and install top screw
attaching the side shelf brackets onto the
cart. Tighten with Phillips screwdriver.
Holding the side shelf, install two shoulder
bolts into the slot and screw into the side
shelf tray. Tighten with a 3/16 Allen wrench.
Place shelf in the up position and check for
level. If shelf is not level, adjust side shelf
set screw. Set screws can be adjusted using
a 3/32 Allen wrench. Turn the Allen wrench
clockwise to raise the shelf. Turn 1/4 turn
and review to see if the shelf is level. The set
screws in the left and right bracket should be
adjusted equally to ensure the shelf sits level.
Optional wood cutting board (model # CAD1-WCB,
70861) can be purchased as an accessory from
www.dcsappliances.com.
2
3
4
1
Shoulder bolt
screw location