12
Transformer installation (for Series 9 grills only)
Your Series 9 grill comes supplied with a power transformer for ignition and internal
lighting, which is concealed in a box with an attached power supply cord. It is
recommended that the transformer is mounted to the rear panel of the CAD1-E cart using
the 4 holes provided.
HZ
VOLTAGE
AMPS
60 Hz
120V
15A
IMPORTANT!
Use only a Ground Fault Interrupter (GFI) protected circuit with this transformer.
The suggested location for installation is above the hole the transformer cord routes
through, which is on the inside of the right-hand side of the cart’s back panel. Remove the
transformer from its bracket, and reuse the 4 nuts and bolts to attach the transformer to
the cart.
INSTALLATION
Routing the transformer cord
Route the cord through the provided hole and
connect to the nearest 120VAC 15A GFI (Ground
Fault Interrupter) electrical outlet.
Содержание DCS CAD1 Series
Страница 1: ...INSTALLATION GUIDE USER GUIDE US CA PROFESSIONAL GRILL CART CAD1 models ...
Страница 2: ......