Fisher & Paykel BI452 Series, Руководство пользователя

Страница: 29 / 36

27
Surface hot indicator lights
The surface hot indicator lights are marked on the ceramic glass.
The indicator lights will glow when the glass above an element
is hot. They will continue to glow after the element has been
turned off until the glass has cooled to a temperature that is safe
to touch.
Dual element control
The left front element can be adjusted from inner element, to
full element.
1
To heat the entire element, push and turn control anticlockwise to
Hi.
2
To heat inner part only, push and turn control clockwise to Hi.
Utensils
To get the best use out of your cooktop, you may need to look at the following points when
selecting utensils
1
The bottom of your cookware should match the size of the cooking area. The saucepan bottom
should be at the most 5 mm smaller to 10 mm larger than the heated surface.
2
The saucepan base must be flat and of sufficient thickness to give good contact and even
temperature distribution.
3
Cookware should be smooth with no jagged edges as these will scratch your cooktop.
4
Aluminium and copper cookware can cause a metallic residue to remain on the cooktop. This
should be removed immediately after each use with ceramic cooktop cleaner and polish. If it is
left it will no longer be removable from the ceramic cooktop.
5
Saucepan bases should always be dry as prolonged use of wet-bottomed saucepans will cause
staining to the cooktop.