Fisher & Paykel 93275, Инструкция по установке/Руководство пользователя

Страница: 16 / 82

12
INSTALLATION INSTRUCTIONS
555mm
835mm
Mounting dryer on wall
1
Determine the position of the dryer on the wall and mark the bracket position.
A minimum of 50mm is needed between the top of the dryer and the ceiling for ease
of installation. If mounting above a washing machine, allow sufficient room to open
the lid of the washer. Refer to page 10 for lid clearances.
A
555mm
From c
entr
e
of t
op hole
From
bott
om
of dry
er
C
B
2
Fix the wall hanging
brackets to the wall
securely, eg into the stud.
If the studs are too far
apart, fit a timber slat to
the studs and then mount
the brackets onto the
slat. Add the same slat
under the two spacers.
The distance between the
centre of each bracket is
555mm (
A ).
3
To install the hooks onto
the dryer, remove one
screw from each side (
B ),
reuse these with two more
(each side) from the kit to
fasten the hooks in place.
4
Remove plastic plugs
from the back of the dryer
and screw the spacers
provided in place (
C ).
5
With assistance, mount the
dryer on the wall brackets.