Fisher & Paykel 93275, Инструкция по установке/Руководство пользователя

Страница: 74 / 82

30
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSES WHAT TO DO
Dryer is beeping,
displaying
unfamiliar light
patterns and/or a
message on the
digital display
Dryer has a fault. Refer to page 28.
Noises Dryer is overloaded. Remove some items from the dryer.
Dryer has a fault. Continuous beeping or a musical
series of beeps with a message
displayed on digital display. Refer
to page 28.
Beeps signalling the end of
a drying cycle. End of cycle beeps can be turned
off. Refer to page 25.
Vibration Dryer is not installed on a
stable surface. Ensure the dryer is installed on
a flat, stable surface. Refer page
7.
Dryer is overloaded. Remove some items from the dryer.
Creasing Cycle selection not
appropriate for the load. Select the ‘Easy Iron’ cycle
(DE7060P only), or ‘Wrinkle Free’
option to minimise creasing.
Dryer is overloaded. Remove some items from the dryer.
‘Dry Temp’ and/or ‘Dryness
Level’ selected too hot/too
long for load type. Try selecting a lower ‘Dry Temp’ and
‘Dryness Level’.
‘Wrinkle Free’ option
not selected. Select the ‘Wrinkle Free’ option to
rotate the load at the end of the
drying cycle. Refer to page 25.
Dye transfer White/light and coloured
items not separated before
drying. Remember to separate white/light
and coloured items before placing
them in the dryer.
Wet items left sitting in the
dryer for long periods of
time before drying. Do not leave wet items sitting in
the dryer for long periods of time
before drying, if they are prone to
colour run. If you do intend to leave
them for long periods before drying,
then separate the load and put
those items that may cause colour
run aside.