1 | Product and functional description
FISCHER Mess- und Regltechnik GmbH
4 / 32
BA_EN_MS13
1 Product and functional description
1.1 Delivery scope
• MS13 Digital pressure transmitter / switch
• Operating instructions
The unit is supplied ex-works with standard parameters.
For accessories, please see the list in section
Order code [
}
29]
.
1.2 Performance features
Important features
• LCD colour change display
• Switchable pressure units
• 2 independent switching points with lots of configuration options
• Analogue signal output with possibility of characteristic curve spread, char-
acteristic curve reversal and offset setting
• Characteristic curve implementation via table with max. 30 measuring points
• Complete adjustment of all parameters and measuring point protocol pos-
sible through optional transmitter PC interface.
Typical applications
• Simple pump control systems
• Monitoring of pumps and compressors
• Filling level measuring
Application areas
• Technical facility equipment (TGA)
• Process engineering
• Process technology
• Environmental technology
1.3 Intended use
The MS13 is a pressure transmitter/ switch for measuring relative pressure. The
unit is suitable for measuring pressure and under-pressure in non-agressive
gas-like and fluid media.
The MS13 complies with the state-of-the-art and is safe; it also takes into ac-
count the relevant regulations and EC directives. The manufacturer will not be
liable for damage arising from incorrect or improper use.
The unit was designed bearing in mind all relevant factors that could impact on
its safety. Also, the unit was produced, inspected and supplied with a user
manual so that if it is used in unforeseeable reasonable conditions, its safety is
guaranteed for its entire service life.
NOTICE
Soiled or aggressive media
Please contact the manufacturer before using this unit with dirty or aggressive
media because the unit needs to be adapted for the specific customer in terms
of the parts that come into contact with the media.
The device may only be used for the purpose stipulated by the manufacturer.
