4
Actuators at the Back Side
Description of the actuators (back side):
(1 / 2)
Combined XLR/Jack Inputs
Channel 1 (left)
Connections for the input signals from the mixing console.
Channel 2 (right)
Assignment of the combined XLR/jack female connection:
1 = Ground = Sleeve
2 = = Tip
3 = Signal - = Ring
With unbalanced wiring, assign PIN 3 to ground (bridge in connection
plug). Nominal input level -10dBu, input impedance 10kohms
(3 / 4)
Combined XLR/Jack Inputs
Channel 3 (left)
Connections for the input signals from the mixing console or another
Channel 4 (right)
source (CD, drum computer, sequencer)
Assignment of the combined XLR/jack female connection:
1 = Ground = Sleeve
2 = = Tip
3 = Signal - = Ring
With unbalanced wiring, assign PIN 3 to ground (bridge in connection
plug). Nominal input level -10dBu, input impedance 10 kohms.
(5)
Line-In Shaker Amp
Balanced jack input for direct control of the shaker section. The signal is
input before the active crossover. This feature is useful to actuate the
shaker via a separate aux-way of the monitor mixing console.
When using this input, input channels 1 to 4 are not routed to the shaker
section any more and thus are only present at the headphone section.
