Panda xControl
Page 24 - Chapter 2: Panda xControl
29.9.16
Fig. 2.5.3.3-1: Sub-menu: Switching Outputs
Select the "Fuel Pump" or "Opt. DC Outputs" by using the
"Step-up"/"Step-down" keys and then confirm with the "Start/
Stop - Enter“ key.
The "Back" item returns you to the "Generator" sub-menu.
The value of the output can be set to "0" for deactivated or
"1" for activated by using the "Step-up"/"Step-down" keys.
Confirm with the "Start/Stop - Enter“ key.
2.5.3.4 Reading out the Event Log of the CP-G
The menu item is selected by using the "Step-up"/"Step-down" keys and confirmed with the "Start/Stop - Enter“ key.
The respective menu item opens.
See “Table of Faults” on page 26. See “Description of the symbols” on page 27.
Fig. 2.5.3.4-1: Event Memory
One can scroll through the event memory by using the "Step-
up"/"Step-down" keys and then return to the Generator menu
with the "Start/Stop - Enter“ key.
2.5.3.5 Resetting all values of the Generator sub-menu to the default values
The menu item is selected by using the "Step-up"/"Step-down" keys confirmed with the "Start/Stop - Enter“ key. The
respective menu item opens.
Fig. 2.5.3.5-1: Resetting all values
"Cancel" or "Confirm" can be selected by using the "Step-up"/
"Step-down" keys and then confirmed with the "Start/Stop -
Enter“ key.
2.5.3.6 Returning the Main Menu
The menu item is selected by using the "Step-up"/"Step-down" keys confirmed with the "Start/Stop - Enter“ key. The
respective menu item opens.
2.5.4 Resetting the panel language to the default (English)
1. Press and hold the "Step down" key with the panel switched off.
2. Switch on the panel and hold down the "Step down" key until the first overview screen is displayed.
3. The panel language has now been reset. All other settings are retained.
Event number
QR Code
Error code
Error time
