Fischer Panda xControl CB-G Скачать руководство пользователя страница 18

Страница: 18 / 30

Panda xControl

Page 18 - Chapter 2: Panda xControl

29.9.16

Fig. 2.5.2.1-1: Sub-menu: Illumination

The value is changed by using the "Step-up"/"Step-down"
keys and the setting is confirmed with the "Start/Stop - Enter“
key.

"Cancel" or "Confirm" can be selected by using the "Step-up"/
"Step-down" keys and then confirmed with the "Start/Stop -
Enter“ key.

2.5.2.2 Setting the contrast of the CP-G

The menu item is selected by using the "Step-up"/"Step-down" keys confirmed with the "Start/Stop - Enter“ key. The
respective menu item opens.

Fig. 2.5.2.2-1: Sub-menu: Contrast

The value is changed by using the "Step-up"/"Step-down"
keys and the setting is confirmed with the "Start/Stop - Enter“
key.

"Cancel" or "Confirm" can be selected by using the "Step-up"/
"Step-down" keys and then confirmed with the "Start/Stop -
Enter“ key.

2.5.2.3 Setting the standby time of the CP-G

The menu item is selected by using the "Step-up"/"Step-down" keys confirmed with the "Start/Stop - Enter“ key. The
respective menu item opens.

Fig. 2.5.2.3-1: Sub-menu: Standby Time

The value is changed by using the "Step-up"/"Step-down"
keys and the setting is confirmed with the "Start/Stop - Enter“
key.

"Cancel" or "Confirm" can be selected by using the "Step-up"/
"Step-down" keys and then confirmed with the "Start/Stop -
Enter“ key.

2.5.2.4 Setting the standby illumination of the CP-G

The menu item is selected by using the "Step-up"/"Step-down" keys confirmed with the "Start/Stop - Enter“ key. The
respective menu item opens.

Fig. 2.5.2.4-1: Sub-menu: Standby Illumination

The value is changed by using the "Step-up"/"Step-down"
keys and the setting is confirmed with the "Start/Stop - Enter“
key.

"Cancel" or "Confirm" can be selected by using the "Step-up"/
"Step-down" keys and then confirmed with the "Start/Stop -
Enter“ key.

2.5.2.5 Setting the display mode of the CP-G overview page

The menu item is selected by using the "Step-up"/"Step-down" keys confirmed with the "Start/Stop - Enter“ key. The

Содержание xControl CB-G































Результаты поиска

Содержание xControl CB-G

Отзывы:

Похожие инструкции для xControl CB-G

Бренды по названию

Популярные бренды

Fischer Panda xControl CB-G, Руководство пользователя

Результаты поиска

Содержание xControl CB-G

Отзывы:

Похожие инструкции для xControl CB-G

Бренды по названию

Популярные бренды